Norway's Ulstein is set to begin the outfitting phase of the Nexans Aurora, a large, DP3, cable laying vessel (CLV) Nexans ordered from Ulstein in 2018.The Nexans Aurora hull arrived Ulstein Verft on Monday, June 15, 2020, after having been built at CRIST…
Oilfield services provider TechnipFMC has chartered the Skandi Vitoria pipelay support vessel.The Brazilian built pipelay support vessel is owned by the joint venture between DOF Subsea (50%) and TechnipFMC (50%).The contract for the Skandi Vitoria will start in January and is for two years…
Probe, a major player in cased hole well logging and reservoir monitoring technology, has announced the launch of the ProMAC, a new series of multi-arm caliper tools.ProMAC series tools offer the most advanced measurements in the industry to…
Equinor and partners OMV and Petoro have made an oil discovery in the Sputnik exploration well in the Barents Sea. Preliminary estimates peg recoverable resources at between 20 million and 65 million barrels of oil.The Sputnik well (7324/6-1) was drilled to a vertical depth of 1…
In April, Maritime Developments (MDL) concluded a flexible installation project offshore West Africa. The work scope, commissioned by DeepOcean, saw the MDL third-generation reel drive system (RDS) used on board the Polar Onyx for installation of a 2…
A specialized winch system aboard the ASN Ile de Class cable laying vessel will facilitate the laying of seismic cables on the seabed of the Johan Castberg oilfield in the Barents Sea for Equinor’s new permanent reservoir monitoring system.MacArtney’s…
The newly delivered Skandi Olinda flexible lay and construction vessel owned by a 50/50 joint venture of TechnipFMC and DOF Subsea has commenced an eight-year charter contract with Petroleo Brasileiro S.A. (Petrobras).'Skandi Olinda has state-of-the-art pipelay and marine technology…
Block Energy Plc, the exploration and production company focused on the Republic of Georgia, is pleased to announce that more than 200 barrels of oil were recovered from the legacy vertical well 16a at its West Rustavi permit during a 10 hour flow period…
Byron Energy has signed a drilling contract with Ensco Offshore for the Ensco 68 jackup rig to drill at the company’s South Marsh Island Block 71 drilling and completion program in the Gulf of Mexico. Ensco 68 jackup…
Statoil's Aasta Hansteen spar hull has been unloaded from Boskalis' Dockwise Vanguard heavy lift vessel and is being 'righted' in a fjord in Norway. The process in Sunnhordland will take days as tens of thousands of water are pumped to move the spar from horizontal to vertical…
Ocean Yield has agreed a contract extension on its four-month bareboat charter of the Lewek Connector subsea construction vessel with a related company of Ezra Holdings at a rate of US$40,000/day. The initial contract was for four months…
Statoil awarded OneSubsea an engineering, procurement and construction (EPC) contract to supply the subsea production system for the Utgard gas and condensate discovery in the North Sea. The scope of the contract includes a subsea template manifold system…
Solstad Offshore has taken delivery of the Normand Maximus and started it on its eight-year charter contract with Italy's Saipem. The Normand Maximus was developed in close collaboration between Solstad, Saipem and shipbuilder Vard…
Italy's Remacut has delivered a 150m-tonne vertical lay system (VLS) for McDermott at its quay side assembly shop in Genoa, Italy, using a single-lift load out. The delivery took place after successful factory acceptance test of all the equipment installed on the VLS…
Italy's Remacut is due to deliver its first system from its new assembly workshop in Genova. The delivery will be a portable 150-tonne vertical lay system for McDermott, to be used initially on the firm's V108 vessel for Inpex's Ichthys project off Australia…
Subscribe
