Drilling in deeper waters calls for more advanced technology. Mark R. Luyster provides an overview of recent fluid advances for the completion phase of deepwater projects. The industry has evolved in the last decade to further drilling…
Given that our issue’s focus is the Gulf of Mexico, it is fitting that we remember the fifth anniversary of the Deepwater Horizon disaster. On 20 April 2010, 11 lives were lost when the Macondo well blew out, spilling millions of barrels of oil…
Infield Systems’ Catarina Podevyn takes a look at recent oil price movements and market conditions on the deepwater (500m+) capex spending up to 2019. Olympus platform in deepwater US Gulf of Mexico…
Often I am asked – what is classification? We get this question a good bit in the offshore industry where the role of class might not be as pronounced as it is in the marine industry. Watson. From ABS…
InterMoor’s Dusan Curic discusses the decommissioning of Anadarko Petroleum’s Red Hawk spar in the US Gulf of Mexico, a job that involved several industry firsts. With holes cut into the hull, Red Hawk spar is being tipped underwater…
Denise Smiles, of Optical Metrology Services Ltd (OMS), discusses how to correct internal HiLo misalignment between butted pipes. OMS’ automatic pipe end dimensioning tool. Images from OMS. Deepwater…
Polymer-lined pipe has been around since the 1990s, but its potential has yet to be fully tapped, according to those behind JIPs to extend use of this technology. Mostafa Tantawi and David Whittle explain. Swagelinings enior…
While methanol/glycol cleaning could be considered the primary removal method, its efficiency in open water is limited. BOURBON has started using high-pressure water jet cleaning as an alternative. The…
Efficiency, cost-effectiveness and optimized analyses are crucial in upstream asset development. OE spoke with Paradigm’s Indy Chakrabarti to chart the pathway to success. Jeannie Stell reports. Indy Chakrabarti…
Jeannie Stell looks at offshore heavy oil development economics with an eye on the current low-price environment. ExxonMobil expects its 52-well Hebron development project offshore Newfoundland to bring in first oil in 2017…
The subsea factory could be here sooner than many believe and Danish firm Danfoss is helping drive the innovation that will make it happen. Emma Gordon reports. Chemical inhibitor system. Photos from Danfoss…
EPCIC contractor EMAS AMC is betting on the deepwater Gulf of Mexico, bringing not only its newbuild vessel the Lewek Constellation, but investing and upgrading a sprawling marine base in Ingleside, Texas. Audrey Leon reports. The…
Subsea trenching has become more versatile with Fugro and SMD’s Q1400. Mike Daniel explains. Launching the Fugro Q1400 trenching system. Photos from Fugro Subsea. It is important to bury wind farm cables…
Halliburton Energy Services’ Harvey J. Fitzpatrick, Jr. shows how wellbore stimulation fluids can increase production. Fig. 1—Example of acid-etching properties of SandStim service. The service…
Installed in 65m water depth in 1998, the Siri platform was an innovation. Now, it has taken another innovation – taking onshore cable stay engineering design concepts for use subsea – to allow the platform to continue operation. Elaine Maslin reports…
Subscribe
