Smith Bits, a Schlumberger company, released the ONYX 360° rolling polycrystalline diamond compact (PDC) cutter. This technology enables a PDC cutter to rotate 360° while drilling, improving drillbit durability in abrasive formations and extending drillbit life and footage drilled per run…
Baker Hughes Inc. announced that its subsidiary, Baker Hughes Oilfield Operations, Inc., successfully deployed the Hughes Christensen Kymera™ hybrid drill bit for Statoil to improve rate of penetration (ROP) and drilling performance in an appraisal well in deepwater Logan field…
Baker Hughes announced the availability of a drilling fluid system that can improve drilling economics by enabling operators to manage circulating pressure more efficiently. The Baker Hughes MPRESS™ drilling fluid system allows operators…
Carrolton, Texas,-based Varel International l a u n c h e d i t s Katana-series steel body polycrystalline diamond compact (PDC) drill bits. Varel’s PDC Product Manager Cary Maurstad describes the line as a definitive enhancement for the company’s fixed cutter…
Dr Keith Millheim, managing director of Nautilus International, a distinguished professor who has also worked with Conoco, Amoco Production, and Anadarko Petroleum, was one of the first to see the potential in automating oil fields. Back in 2008…
Smith Bits, a Schlumberger company, introduced the Stinger conical diamond technology last month. The bit features an ultrathick polycrystalline diamond layer that is thicker than conventional PDC cutters. The Stinger element enables high-point loading to fracture rock more efficiently…
The last few months have been busy ones for Varel International. The Texas-based drill bit manufacturer celebrated the opening of its Houston technology center and also launched two drill bit lines, the Raider and the Voyager series…
To meet drilling challenges, such as hole sections with long steep inclinations and severe doglegs, the keystone of a new drilling campaign offshore Thailand includes use of rotary steerable systems instead of the downhole motors traditionally used there…
Customized bits enabled Petrobras to successfully drill hard carbonates of pre-salt reservoirs and hard and interbedded post-salt formations of two different offshore wells, while at the same time lowering vibrations, increasing rates of penetration…
Ulterra opened a stock point for its matrix and steel body PDC bits in Hammond, Louisiana, last month. Overseen by Rob Smith, and strategically located just 46 miles east of Baton Rouge and 58 miles northwest of New Orleans, the new facility will support Gulf Coast drilling operations.
Nearly 11 years after Weatherford first commercially deployed drilling-with-casing, the service company is still testing the limits of where and how the technology can be helpful when it comes to overcoming wellbore instability. Jennifer Pallanich catches…
TORXS saves a well Baker Hughes has introduced an expandable liner hanger system that the company says is the only system of its type that is installed and released prior to a cement job, eliminating the risk of running tools becoming fixed in place during cementing…
Drilling system vibration was recognized as a potential cause of elevated drilling costs half a century ago. It has been thoroughly studied in the years since, and sound mitigation practices have been published. Shell's Mark Dykstra discusses the state of the art…
Coring practices and equipment used in the Gulf of Mexico's Lower Tertiary needed to adapt to formation conditions to improve on past recovery success. Petrobras' James Meyer opens OE's drilling & completion technology two-parter with a review…
Non-productive time (NPT) associated with control systems software and hardware integration remains a significant drain on high-spec offshore asset costs, according to a study released last month.The study, by the Athens Group and ModuSpec,…