Free span analysis

Pat Oakley
Friday, February 1, 2013
Case A
Case B

On a separate but related theme, the Umbilical Manufacturer’s Federation has recently published a guidance note on the subject of free span analysis.

The term ‘free span’ is used to refer to the scenario whereby a section of installed static umbilical is unsupported along its length on the seabed for a distance, typically greater than 3m.

If the lay route includes free spans longer than the critical length then the umbilical may be subject to vortex induced vibration possibly leading to one or more of the following: fatigue, wear, curvature and infringement of local structural capacity at span shoulder.

The reasons for the umbilical being unsupported can be various, eg local seabed topology, scouring of the soil from underneath the umbilical, the physical configuration of the subsea terminations, spans between I-tube and seabed, and at pipeline crossings.

The guidance note describes the typical process employed when conducting free span analysis on umbilicals, and describes the primary and secondary parameters utilised in the analysis. The document is intended as a free reference source for all engineers involved in umbilical system specification, design and installation, and can be downloaded from

See main story: "Installation intiative increases industry involvement"

Categories: Subsea Pipelines

Related Stories

Marine-i Supports Reflex Marine's Development of Floating Wind Turbine Mooring Solution

Expro Reels in $50M Worth of Subsea Contracts in Malaysia, Australia

Manifold Installed at Neptune-operated Seagull in the UK

Current News

Floating WInd Tech: TetraSpar Demonstrator Starts Operation Off Norway

Report: Halliburton Offers to Buy Exxon's Stake in Iraq's West Qurna 1 Oilfield

Ørsted Reaches FID on Two German Offshore Wind Farm Projects

UAE's ADNOC to Invest $127B in 2022-26 as Oil, Gas Reserves Rise

Subscribe for OE Digital E‑News