Offshore platform fire forces evac

Gregory Hale
Friday, October 10, 2014

A fire at an offshore natural gas platform in Alaska’s Cook Inlet forced four workers to evacuate and destroyed the crew’s living quarters. According to officials, no one suffered injuries and the environmental risk was minimal.

Photo from Nikiski Fire Dept.

The blaze broke out 2 October at 7:30 a.m. By evening, the unified command set up for the incident said the fire was in full containment.

Hilcorp Alaska LLC owns the platform and 11 others among the 16 platforms in the inlet.

The platform would end up monitored through the night, the unified command including Hilcorp, the Coast Guard and the state Department of Environmental Conservation said in a statement.

Hilcorp spokeswoman Lori Nelson says a Hilcorp helicopter crew evacuated the four workers from the platform 8 mi. offshore. There was no spill at the scene about 45 mi. southwest of Anchorage. The affected site, called the Baker platform, has only one active production well, and they were able to shut it off remotely.

Coast Guard Petty Officer Joshua Yates says 11,000 gallons of diesel fuel were onboard, along with 8000 gallons of drill mud and 1000 gallons of hydraulic oil.

A subsurface pipeline that carries the gas to the town of Nikiski also closed down.

According to Nelson, the fire broke out during a morning safety meeting and was not production-related. All four workers who evacuated were doing well, but they were undergoing evaluation.

“Once the response is complete and the platform is deemed safe for folks to be on board, we’ll be cooperating in a full investigation with both federal and state authorities,” says Nelson.

The cause of the blaze was still under investigation, according to responders, who included Coast Guard and Alaska Department of Environmental Conservation personnel.

Mike McNeil, a Coast Guard civilian command duty officer in Anchorage, says the agency overheard radio communications by vessels reporting smoke in an area at 8:30 a.m. Hilcorp reported the fire after that.

The Coast Guard says five vessels were involved in fighting the fire and the agency dispatched a cutter, helicopter and another aircraft.

Cook Inlet stretches 180 mi. from Anchorage to the Gulf of Alaska.

According to Nelson the Baker platform is among 10 in the inlet that Hilcorp purchased in January 2012. Of those, nine are active in production, with many old wells reactivated. The Baker platform is among those reactivated, with minimum production from just one well.

Cathy Foerster, one of three members of the Alaska Oil and Gas Conservation Commission, says the company has been considering whether to activate more wells in the inlet.

“Now they’ll have to weigh into that consideration whatever costs are associated with fixing whatever the fire impact is,” says Foerster.

Categories: Arctic Production Automation Natural Gas Platform Us Coast Guard

Related Stories

Norway's Hammerfest LNG Plant Extends Outage

Chevron Sanctions $1.6B Ballymore Deepwater Project in U.S. Gulf of Mexico

Woodside Sees Slim Risk of Big Share Selloff by BHP Investors

Current News

Valaris MS-1 Offshore Drilling Rig Reaches Sasanof-1 Well Site

Brouwershaven to Resign as CEO of Heerema to Focus on New Challenges

Eni, TotalEnergies Start Drilling on Cronos-1 Prospect Offshore Cyprus

Output from IOG's Southern North Sea Fields Shut Over Issues with Onshore Terminal

Subscribe for OE Digital E‑News