Ichthys uses Sonardyne SensorView

OE Staff
Tuesday, May 10, 2016

Software that enables acoustic data to be streamed in real-time from subsea structures as they are installed has helped to reduce non-production time (NPT) for independent oil and gas producer, INPEX, and its survey contractor, Neptune Geomatics, during construction of the Ichthys gas field, offshore Western Australia.  

Supplied by subsea technology company Sonardyne, the SensorView software allowed data gathered by an acoustic transponder mounted on tubing head spools (THS), to be transmitted at high speed to rig personnel monitoring the installation operations. The parameters measured by the transponder’s on-board sensors included heading, depth, sound velocity and inclination, and meant that delays previously incurred while aligning each THS to drilling templates, could be reduced.  

Located 220km off the coast, Ichthys represents the largest discovery of hydrocarbon liquids in Australia in over 40 years. It covers an area of around 800sq km in water averaging depths of around 250m and is estimated to contain more than 12Tcf of gas and 500 MMbbl of condensate. 

The field will be developed using a semi-submersible central processing facility, the largest of its kind anywhere in the world, and an FPSO connected by 890km of gas export pipeline to an onshore processing and storage facility at Bladin Point near Darwin.  

As part of a 40 month contract, INPEX contracted Neptune to provide rig positioning and survey services during the drilling and completions phase of the project, work that is being undertaken by the Jack Bates and Ensco 5006 mobile drilling units. 

At each of the five drill centers, Neptune installed a seabed array of Sonardyne Compatt 6 Long BaseLine (LBL) acoustic transponders to accurately position the spud locations and monitor the installation of the drilling guide bases (DGBs) as they were lowered from the surface. Structure-mounted Compatt 6s fitted with high resolution inclinometers and depth sensors were used to verify final DGB positions and inclinations following cementing of the conductor in the top hole section. 

While trying to align each THS with the DGBs once they arrived at depth, operational delays leading to rig non-productive time were incurred. To avoid such delays, INPEX requested that Neptune gather real-time positioning and heading information on each spool as it was being maneuvered.  

The requirement was met using SensorView, Sonardyne’s dedicated sensor monitoring software application. It can be used in parallel with 6G acoustic positioning systems such as Fusion, or as a standalone solution for remote monitoring and subsea data harvesting projects. 

At Ichthys, SensorView was mobilized on one of the rigs and interfaced with a Dunker 6 transceiver which was deployed over the vessel’s side. Subsea, a Sonardyne GyroCompatt 6 was temporarily mounted on each THS and attached using a customized bracket designed to allow an ROV to recover the unit after each THS was installed.

GyroCompatt 6 combines the features of a Lodestar Attitude and Heading Reference System (AHRS) with a Compatt 6 transponder in one unit to provide high update rate wireless attitude, heading, heave, surge, sway, pressure, sound velocity and acoustic positioning of any subsea object. 

“During Neptune’s recent Ichthys drilling and completions campaign, SensorView delivered us THS heading update rates of approximately one every three seconds,” said Pat Fournier, operations manager for Neptune’s Geomatics service line. “This was sufficient for our surveyors to fully understand the dynamic motion of the structures and thereby reduce the time needed to land them in the correct location. We were impressed with the ease with which we could configure SensorView to work with our LBL acoustic hardware and view the data streams we needed to see.”

Image: SensorView/Sonardyne

Categories: Software Subsea Equipment Construction Installation Technology Australia/NZ Drilling Hardware Drilling Engineering

Related Stories

Increasing Accuracy and Efficiency with Data-Rich 3D Models During Construction of the Platforms of Johan Sverdrup

FPSOs: Floating Ideas

Santos Could Store CO2 from Barossa Field in Depleted Bayu Undan Reservoir

Current News

Aker BP Raises Dividend as Q3 Profit Jumps on Strong Oil, Gas Prices

Orcadian Gets Three FPSO Proposals for Pilot Field

Weak Q3 and Mixed 2022 Guidance Overshadow Saipem's New Plan

Bureau Veritas Wins Work on Ithaca Energy's North Sea Assets

Subscribe for OE Digital E‑News