Join OEdigital on Facebook Join OEdigital on LinkedIn Join OEdigital on Twitter
 

ABS completes VolturnUS FOWT FEED review

Written by  OE Staff Thursday, 14 September 2017 09:11

ABS has completed the design review of the front end engineering and design (FEED) documentation for the University of Maine (UMaine) developed floating offshore wind turbine (FOWT) concept, the VolturnUS.

VolturnUS. Illustration from ABS.
 

“ABS has been the leading classification organization for the offshore industry from the very beginning of offshore operations, and we are pleased that the renewable energy industry is now looking to ABS for FOWT design review,” says ABS Executive Vice President for Global Offshore Ken Richardson.

The patented VolturnUS, developed by the Advanced Structures and Composites Center at the University of Maine is based on a concrete four-column semisubmersible hull concept. In 2013, the UMaine team successfully tested the feasibility of the concept by developing a 1:8 scale model and deploying it offshore Maine. The current pilot project consists of two full scale semisubmersibles, each with a 6 MW turbine that are designed to be on site for 20 years. Both units will be connected to the Maine power grid by subsea cables.

“UMaine is pleased that its innovative design became the first floating wind turbine concrete semisubmersible hull to be reviewed by ABS, and found to meet the ABS requirements,” says UMaine Director and Principal Investigator Dr. Habib J. Dagher. “After 10 years of development, this is a major milestone for our program, and we expect the VolturnUS hull concept to continue to attract private investment from the US and around the world. Nearly 70% of the US offshore wind resources can be captured using the UMaine VolturnUS technology, and we are looking forward to working with offshore wind developers across the US.”

ABS completed a design review of the semisubmersible, verifying compliance with the ABS Guide for Building and Classing Floating Offshore Wind Turbine Installations. The process consisted of an independent review of the hull/tower structure, coupled aeroelastic/hydrodynamic loads, safety, stability, electrical systems, equipment, piping and hydrodynamic and station keeping design. ABS determined that FEED design, as presented, met the requirements of the relevant ABS Rules and regulatory standards.

Plans are in place for the semisubmersibles to be used for the New England Aqua Ventus I project, a 12 MW facility offshore Maine funded by the US Department of Energy. According to UMaine, this is a pilot project to demonstrate that the innovative design of the VolturnUS is a viable and economical alternative for offshore wind developments in water depths greater than 50m.

“ABS worked closely with the University of Maine through all design phases of the Aqua Ventus project,” says University of Maine Engineering Manager Anthony Viselli. “We are excited about the positive results from the design review and the potential for deploying this technology elsewhere in the US and abroad.” 

Read 8038 times