Join OEdigital on Facebook Join OEdigital on LinkedIn Join OEdigital on Twitter
 

EyeCGas gets EPA QuadOa compliance

Written by  OE Staff Wednesday, 07 December 2016 12:42

OPGAL, a manufacturer of thermal imaging cameras for the oil and gas industry, has received independent verification for its Optical Gas Imaging (OGI) technology in relation to the new Environmental Protection Agency (EPA) "QuadOa" regulation (EPA NSPS 40 CFR part 60 subpart OOOOa).  

EyeCGas, the OGI camera that enables users to identify hydrocarbon and volatile organic compound (VOC) leaks with pinpoint accuracy, was independently tested at the UK’s National Physical Laboratory, and was proven compliant with the regulation requirements. The rule requires the OGI camera to be capable of imaging a gas that is half methane, half propane at a concentration of 1% at a flow rate of less than or equal to 60g/hr. 

“The EPA identified optical gas imaging as the best system for emission reduction (BSER), as it enables detecting leaks safely, remotely and efficiently,” said Omer Yanai, vice president of gas imaging and technology innovation, OPGAL. “EyeCGas is the only camera compliant with QuadOa that is also certified for Class I Div 2 hazardous locations.”  

QuadOa was introduced to reduce greenhouse gas and VOC emissions in upstream and midstream operations. Its leak detection and repair (LDAR) requirement means that oil and gas operators now need to routinely monitor fugitive emissions from equipment at new, modified and reconstructed well sites and compressor stations.  

The new regulation came into effect in August 2016, and will become mandatory by June 2017. OPGAL will be offering best practice training for emission reduction in early 2017.

Image: EyeCGas/OPGAL

Read 3874 times