Join OEdigital on Facebook Join OEdigital on LinkedIn Join OEdigital on Twitter
 

SLB develops fluid mapping service, SpectraSphere

Written by  OE Staff Wednesday, 03 May 2017 11:00

Schlumberger (SLB) has released their new SpectraSphere fluid mapping-while-drilling service at the 2017 Offshore Technology Conference in Houston, Texas.

The service delivers downhole fluid composition during drilling with real-time pressure measurements-while-drilling. Applicable in a variety of environments, from exploration wells to highly deviated development wells, SpectraSphere has been developed to lower risks associated with fluid analysis and sampling operations while enhancing well placement, maximizing reservoir contact and ultimately boosting future production.

“Understanding the parameters of the reservoir in real-time is critical for all our customers during all stages of field development,” said Richard Brown, president, drilling and measurements, Schlumberger. “The SpectraSphere service enables customers to obtain laboratory-quality fluid analysis while drilling, which reduces the overall cost of operations and risks associated with conventional fluid analysis.” 

The SpectraSphere service enables real-time fluid mapping by providing critical fluid properties, including fluid composition, fluid typing, fluid fractions and gas/oil ratio while drilling. The reliable characterization of these properties is essential for estimating reserves, optimizing completions, designing surface facilities and meeting production goals.

The service has been field tested in the Gulf of Mexico, Middle East, Africa, the North Sea and offshore Malaysia. While developing a field offshore Malaysia, a customer used the new service to acquire formation fluid samples and pressure measurements in a highly deviated wellbore that intersected pressure-depleted zones with increased risk of differential sticking. The customer obtained all fluid samples and pressure measurements in one run, with fluid samples showing less than 1% contamination. The customer completed sampling in two hours per station and removed the need to conduct further formation testing in two additional wells, saving three operating days.

Read 8057 times